Marble + Exotic Stones
Marble and Exotic Stones + Custom Cuts + Multiple Finishes
- Marble Slab Sections
- American | European Zones
- Marble Tile Sections
- American | European Zones
- Mathios Stone Sections
- Euroupean Zones
- Decor Stone | Pavers
- American Zones
Marble Slab Sections
Marble Slabs (or Marble Sheets) range between 10-feet in length to 8-feet in length. Width ranges between 6-feet to 4-feet. Our marble slabs are segmented in various levels depending on your preference or project requirements: Level A | Level B | Commercial Grade.
Premium-grade Marble is what we offered from our quarries, and is obtained as large blocks and slabs only after a thorough inspection process. While other materials may be available with the same name, the quality would vary, we advise you to compare the quality of the actual materials prior to specifying or purchasing.
Marble is a classic architectural material and is suitable for a variety of applications from countertops to building facades.
Marble Slab Customization
Full customization is offered at our quarries, granting us the advantage of providing you with the choice cuts of marble that you desire. In addition, further detailed customization is also offered : Custom Sizes (in the case of floor-tiles, the custom sizes of the tiles) | Finish Coat (in the case of a wall facade, the texture of the display side of the marble).
We offer a variety of ‘finish coats’ : Polished | Sawed | Honed (rough or fine) | Chiselled | Sand Blasted | Split Face | Flamed | Antiqued.
We understand the personal decision that goes into the selection of marble, however just as painstaking as that is in making that selection, so is too the selection of the appropriate ‘finish coat’, and for this our Customer Support team is always available for consultation. Customization on our end also extends to whether the marble will be used outdoors or indoors, as, in the case of floor-tiles that are to be used outdoors, we can ensure a ‘non-slip surface’.
The customization of marble is endless, so feel free to seek support from our Customer Support team for all your customization needs and specifications.
PROCUREMENT OPTIONS
- Marble Block (uncut)
- Full-size Marble Slab
- Custom-cut Marble Slab
- Un-Finished Marble Slab
- Finished Marble Slab
Common Finish Options
- Polished
- Fine Honed
- Sawed
- Chiseled
- Antiqued
Marble Tile Selection
Marble Tiles are commonly supplied in two forms : (i) Custom-cut Tiles (such as in the case with floor tiles) | (ii) Custom-cut Patterns (such as in the case of a series of random cut sizes to be used as a pattern for a Wall Facade or a Mosaic).
The most common selection is Custom-cut Tiles, and these are usually procured in large squares so as to reduce the joining that is required during the installation process. Our common sizes range from 18-inches in length to 60-inches in length. Width ranges between 18-inches to 60-inches. However, as all sizes are cut upon order, we can provide any size that you require. Our marble tiles are segmented in various levels depending on your preference or project requirements: Level A | Level B | Commercial Grade.
Premium-grade Marble is what we offered from our quarries, and is obtained as large blocks and slabs only after a thorough inspection process. While other materials may be available with the same name, the quality would vary, we advise you to compare the quality of the actual materials prior to specifying or purchasing.
Marble is a classic architectural material and is suitable for a variety of applications from countertops to building facades.
Marble Tile Customization
Full customization is offered at our quarries, granting us the advantage of providing you with the choice cuts of marble that you desire. In addition, further detailed customization is also offered : Custom Sizes (in the case of floor-tiles, the custom sizes of the tiles) | Finish Coat (in the case of a wall facade, the texture of the display side of the marble).
We offer a variety of ‘finish coats’ : Polished | Sawed | Honed (rough or fine) | Chiselled | Sand Blasted | Split Face | Flamed | Antiqued.
We understand the personal decision that goes into the selection of marble, however just as painstaking as that is in making that selection, so is too the selection of the appropriate ‘finish coat’, and for this our Customer Support team is always available for consultation. Customization on our end also extends to whether the marble will be used outdoors or indoors, as, in the case of floor-tiles that are to be used outdoors, we can ensure a ‘non-slip surface’.
The customization of marble is endless, so feel free to seek support from our Customer Support team for all your customization needs and specifications.
PROCUREMENT OPTIONS
- Marble Block (uncut)
- Full-size Marble Slab
- Un-Finished Marble Slab
- Finished Marble Slab
- Custom-cut Marble Tiles
COMMON FINISH OPTIONS
- Polished
- Fine Honed
- Sawed
- Chiseled
- Antiqued
Mathios Stone Selection
One of the most complete collections of stone and brick veneers in the world, offering resourceful design possibilities and matching all types of architectural design styles and trends. As it is made of natural stone materials, it is ideal for both outdoor and indoor use — and retains its luster and natural finish for a lifetime, and maintains its tile as being an earth-friendly decor product.
Due to it being its lightweight stricture, there is no limit to where it can be installed. Mathios Stone can be laid on diverse surfaces such as bricks, walls, thermal insulation, gypsum boards, and even glass.
In addition, this product also meets all performance tests and has shown excellent outdoor and indoor durability, making them suitable for all weather & climate conditions.
Mathios Stone Customization
Mathios Stone features an array of complex forms and colors of nature, such as : Warm Beige, Earthy Brown, Copper hues, Terracotta, Ash Gray, Dusky Slate, Pure White & Charcoal Black — making it easy for designers to express their creativity with our diverse selection.
In addition, the option of various textures ranging from : Linear, Rectangular, Irregular, Round, Geometric, Brick Slips, Coarse & Smooth — further expands a designer’s creative leverage.
As we work directly with our manufacture customization is also an option, and is usually done on special projects that require a specific color or hue. This is achieved by providing us with the RAL Number of the color you wish to obtain, and this version is that created by our engineers and design teams.
Additional Specifications
- Flat Sections - Length 2.36” to 20.86"
- Flat Section - Height 0.78” to 6.29"
- Corner Section - Length 2.36” to 2.75” | 3.94” to 7.48"
- Corner Section - Height 2.36” - 6.29"
Avaliable Textures
- Rough Texture
- Mild Texture
- Smooth Texture
887
WORK COMPLETED1500
FAN PRODUCTS8
EXPORT COUNTRIESRequest your Wholesale Quote
Provide a detailed Architectural Drawing + Window Schedule, based on the actual ‘as-built’ layout of the area where your custom windows will be installed.
Provide a detailed description of your Design + Window Schedule, detailing functionality, custom sizes, Impact Zone, finishes, and colors.
Provide details of types of Hardware styles (hinges, handles) required. Show image(s) of Handle styles you require, etc. Optional multiple locking can be provided.
Provide details of your customized requirements. As we work directly with the manufacturers and are able to provide multiple customized options : height, glass-inserts etc.
Enjoyed the fact that with every project, even a basic purchase of Window /Door, the manufacture’s engineers are involved to ensure that the product quoted is suitable for your geographic region, and ‘extreme weather conditions.
- V. HASSLER
Working with a manufacture provided us with customization at no added cost + the engineer's involvement in modifying the ‘impact-glass' to meet category #5 wind speeds + the third layer of glass and layer of thermal-barrier for an extra reduction in thermal radiation.
- A. HANLEY
The level of sophistication in the craftsmanship and design. I am overly excited about my screen that retracts into the side-wall of the window frame - with just a single touch. Such great functionality.
- D. YANG
As a Designer /Contractor, and faced with a project in the Caribbean on a cliff, facing the Tradewinds - the requirement for an extreme heavy-duty Window and Door package to overcompensate for extreme hurricanes was needed. I am so please with the engineering that produced these elegant, yet rigid windows /door package.
- L. LAKE